Short Arm Soft Close Hinges with 4 hole mounting plate
- Available in Full Overlay.
- Can be used in Aluminium Framed Cabinets.
- Soft Close mechanism prevents shutter from banging.
- Max. Opening : 100°.
- Max. Shutter size : 34" x 22" (850mm x 550mm) for 2 Hinges.
- Shutter Thickness : 16mm to 19mm.
- Shutter Cavity : Ø35mm, 12 deep, Cavity 4mm from edge.
- Finish : Nickel Plated
|HSA1M1-SC||Full Overlay||Nickle Plated|
- Drill out the cavity in the shutter as per the dimensions in Fig. 1.
- 2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter.
- 3. Mark holes in the cabinet for mounting plate as per Fig.2 and screw on the Hinge to the Cabinet.
- 4. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.