Menu
Your Cart

Hi Slide 90 Soft Close

Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
Hi Slide 90 Soft Close
  • For Flush Mounted Sliding Shutters
  • Soft Opening and Soft Closing
  • Bottom Dome Track for Smooth Rolling
  • Special guide rollers Provided to avoid noise while sliding
  • Load Capacity: 90 Kgs.
  • System 32 Compatible
  • Shutter Size : Width = 950 mm (Min.)
  • Thickness = 22mm (Max.) for Twin Track
ItemCodeWeight (Kgs)Finish
Hi Slide 90 Soft Close (Dome Track)HS-90-SC90

Zinc White

Al. Profile Track HS-90DT (forTop)HS-90-TT-AS-2 Anodized Silver
HS-90-TT-3M-AS 
HS-90-TT-AS-3 
Al. Profile Track HS-45DT/HS-90DT (for Bottom)HS-45-DT-AS-2 Anodized Silver
HS-45-DT-3M-AS 
HS-45-DT-AS-3 
Al. Profile Hi Slide 90 Twin Track - TopHSDT-TTT-2 Anodized Silver
HSDT-TTT-3M 
HSDT-TTT-3 
Al. Profile Hi Slide DomeTwinTrack-Bottom
(for HS-90 & HS-45)
HSDT-TDT-2 Anodized Silver
HSDT-TDT-3M 
HSDT-TDT-3 
  1. Cut a Slot of 2mm wide & 6.5mm deep in bottom of Cabinet & Insert the Dome track into slot as shown in Fig. 2. (Twin Bottom track to be screw fitted) for dimensions refer Fig. 1.
  2. Fix top track (Twin Top Track) onto the top inner face of cabinet as shown in Fig. 3, for dimensions refer Fig. 1.
  3. Drill Ø52mm cavity 14mm deep on the bottom of shutter as shown in Fig.4 & screw the Bottom guide. Fit Top guide onto the top side of shutter as shown in Fig 5.
  4. Soft Close fitting inside the top track as shown in Fig 6 (adjustment as per soft closing action required)
  5. Engage top side of shutter into the top track; then rest the bottom guide onto Dome track as shown in Fig. 7.
  6. Loosen the M5 screws in Bottom guide & adjust the height to desired position as shown in Fig. 8.

$0.00