Hi Slide-90 Dome Track
- Cut a Slot of 2mm wide & 6.5mm deep on bottom of Cabinet, & Insert the Dome track into the slot as shown in Fig. 2 for dimensions refer Fig. 1.
- Slide the catch into the top track from either sides as shown in Fig. 3.
- Fix top track onto the top inner face of the cabinet as shown in Fig. 4, for dimensions refer Fig. 1.
- Drill Ø52mm cavity 14mm deep on the bottom of the shutter as shown in Fig.5. & screw the Bottom guide.
- Fit the Top guide onto the top side of the shutter as shown in Fig 1.
- Engage the top side into the top track as shown in Fig. 6 & then rest the bottom guide into the Dome track as shown in Fig. 7.
- Loosen the M5 screw in Bottom guide & adjust the height to desired position as shown in Fig. 8.
$0.00