Flat Screen Holder Single Arm - Edge Mount
- Clamp the vertical pole onto the edge of the table as shown in Fig.1.
- Clip the height adjustment clip onto one of the holes on the vertical pole, & slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip, as shown in Fig.2.
- Assemble the other parts as shown in Fig.3.
- For VESA 100mm model screw the 100mm plate to hanging bracket with M4 screws as shown in Fig.4.
- Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig.5.
- Insert the monitor cables into the arm clip & wire holder, then clip them to the diagonal arm & vertical pole respectively as shown in Fig.6.
$0.00