Euro Slow Motion Hinge (Regular / With 2 hole Mounting Plate)

Euro Slow Motion Hinge (Regular / With 2 hole Mounting Plate)

  • Unique built in damping system allows the shutter to close in slow motion without banging.
  • Available in Full overlay, Half overlay & Inset.
  • Max opening 105°
  • Max shutter size: 34" x 22" (850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 16mm to 19mm.
  • Shutter cavity: Ø35mm, 12mm deep, cavity 4mm from edge.
  • Finish: Nickel Plated 

Euro Slow Motion Hinge (Regular / With 2 hole Mounting Plate)

 

Euro Slow Motion Hinge (Regular / With 2 hole Mounting Plate)
 

  • Unique built in damping system allows the shutter to close in slow motion without banging.
  • Available in Full overlay, Half overlay & Inset.
  • Max opening 105°
  • Max shutter size: 34" x 22" (850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 16mm to 19mm.
  • Shutter cavity: Ø35mm, 12mm deep, cavity 4mm from edge.
  • Finish: Nickel Plated 
Specifications
Model Code A'mm Finish 
Euro Slow Motion Hinge - Full Overlay with 2 Hole Mounting Plate E-HSM1 36 Nickel Plated 
Euro Slow Motion Hinge - Half Overlay with 2 Hole Mounting Plate E-HSM2 36 Nickel Plated 
Euro Slow Motion Hinge - Inset with 2 Hole Mounting Plate E-HSM3 58 Nickel Plated 

 

Model Code A'mm Finish 
Euro Slow Motion Hinge - Full Overlay with 4 Hole Mounting Plate E-HSM1-M1 36 Nickel Plated 
Euro Slow Motion Hinge - Half Overlay with 4 Hole Mounting Plate E-HSM2-M1 36 Nickel Plated 
Euro Slow Motion Hinge - Inset with 4 Hole Mounting Plate E-HSM3-M1 58 Nickel Plated
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Fitting Instructions
  1. Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'Ebco' Drilling jig. Do not chisel.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
  4. Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.

 

Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Caution

For efficiency and durability 

  • To avoid damage to hinge, do not force the door to exceed 105°.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinge must not be hammered.
Packing Chart
Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
Qty Weight Qty Weight
Euro Slow Motion Hinge Overlay with 2 hole Mounting Plate E-HSM1 - - 50 9.358
Euro Slow Motion Hinge Half Overlay with 2 hole Mounting Plate E-HSM2 - - 50 9.472
Euro Slow Motion Hinge Inset with 2 hole Mounting Plate E-HSM3 - - 50 9.904
Euro - Slow Motion Hinge Overlay with 4 hole Mounting Plate E-HSM1-M1 - - 50 9.75
Euro - Slow Motion Hinge Half Overlay with 4 hole Mounting Plate E-HSM2-M1 - - 50 9.75
Euro - Slow Motion Hinge Inset with 4 hole Mounting Plate E-HSM3-M1 - - 50 9.75

 

 

 

Ebco - Furniture Fittings and Accessories © 2020
GLI