- Ergonomically designed to enable easy installation of mirror without frame and no drilling on the mirror required.
- Made out of SS 304.
- Special PVC packing provided to protect the glass.
- Can be used with mirror thickness from 4mm to 8mm.
- A pair of bottom holder can withstand approximately 10 kgs.
- More holders can be used depending upon application.
- Stainless steel screw provided.
- Screw both the bottom holders as per the desired width of the mirror and both the bottom holders should be at the same height as shown in Fig.1.
- Screw both the top holders in such a way that the Internal Dimension ‘A’ should be 2 to 3mm less than the height of the mirror as shown in Fig.2.
- Insert mirror into top spring loaded holders and lift slightly up and then rest it safely into the bottom holders as shown in Fig.3.
|Model||Code||Inner Packing (Kgs.)||Outer Packing (Kgs.)|
|Mirror Holder||MH1||50 Sets||2.4||250 Sets||12.8|