Your Cart

Click On Hinge (I)

Click On Hinge (I)
Click On Hinge (I)
  • Unique Click on System enables easy installation of shutter
  • Available in Full overlay, Half overlay & Inset.
  • Max. Opening: 105°.
  • System - 32 compatible
  • Max. Shutter size: 34" x 22"(850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 16mm to 19mm.
  • Shutter cavity: Ø35mm, 12 deep, cavity 4mm from edge.
  • Finish: Nickel Plated
Code Nos.Model'A' mmFinish
HC3-IInset56.0Nickel Plated
  1. Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and click-on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Ebco Click On Hinge I
Ebco Click On Hinge I
Ebco Click On Hinge I
Ebco Click On Hinge I
ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
Click on Hinge - Inset (I)HC3-I--100 Sets16.192

For efficiency and durability.

  • To avoid damage to hinge, do not force the door to exceed 105°.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinges must not be hammered.