Heavy Duty Drawer Slide -125

1. To install gap per side 20.0mm is required between cabinet and drawer. (Ref. Fig. 1)
2. Depress latch and remove the inner slide. (Ref. Fig. 2)
3. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through holes in intermediate slide.
4. Slides should be fitted parallel and screw tightened fully to avoid gaps.
5. Fit inner slide onto the outside of the drawer.
6. Now slide the drawer with inner slide engaged on to the intermediate slides on the cabinet till the latch will automatically engage.

 

For efficiency and durability.

• Strictly maintain 20.0mm side gap.
• Fit slides parallel and at equal heights.
• Do not apply paint or brush.
• Do not let saw dust enter into the slides.