Computer Monitor Arm - Single Screen

Computer Monitor Arm - Single Screen

  • Robotic arm design enables flexibility for practical view.
  • Concealed cable management system for clutter free work desk.
  • Table top grommet mounting for 15" to 27" screen.
  • Compatible for VESA 75 x 75 & VESA 100 x 100.
  • Die cast  for good asethetics.
  • Maximum load: 8 kilograms per arm.

Computer Monitor Arm - Single Screen

 

Computer Monitor Arm - Single Screen
 

  • Robotic arm design enables flexibility for practical view.
  • Concealed cable management system for clutter free work desk.
  • Table top grommet mounting for 15" to 27" screen.
  • Compatible for VESA 75 x 75 & VESA 100 x 100.
  • Die cast  for good asethetics.
  • Maximum load: 8 kilograms per arm.
Specifications
Model Code Finish
Computer Monitor Arm - Single Screen CMA-SA Black / Silver / White Texture / Anthracite
Fitting Instructions
  1. Fix the Diagonal Arm onto the Base with Cap & M6 screw as shown in Fig.1.
  2. Tighten the grub screw shown in Fig. 1a.
  3. Drill Ø10.5 mm hole through out on table top on the desired position & Mount the Base as shown in Fig.2.
  4. Screw the Flat Screen to the Mounting plate as shown in Fig.3.
  5. Pressure can be adjusted by tightening & loosening the screw as shown in Fig.4.
  6. Thighten the screws to adjust the load of the monitor as shown in Fig 5.

 
 
 
Packing Chart
Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
Qty Weight Qty Weight
Computer Monitor Arm - Single Screen CMA-SA 1 No. 1.92 4 Nos. 8.5
Ebco - Furniture Fittings and Accessories © 2020
GLI