Computer Monitor Arm - Single Screen
- Robotic arm design enables flexibility for practical view.
- Concealed cable management system for clutter free work desk.
- Table top grommet mounting for 15" to 27" screen.
- Compatible for VESA 75 x 75 & VESA 100 x 100.
- Die cast for good aesthetics.
- Maximum load: 8 kilograms per arm.
|Computer Monitor Arm - Single Screen||CMA-SA||White Texture / Anthracite|
- Fix the Diagonal Arm onto the Base with Cap & M6 screw as shown in Fig.1.
- Tighten the grub screw shown in Fig. 1a.
- Drill Ø10.5 mm hole through out on table top on the desired position & Mount the Base as shown in Fig.2.
- Screw the Flat Screen to the Mounting plate as shown in Fig.3.
- Pressure can be adjusted by tightening & loosening the screw as shown in Fig.4.
- Tighten the screws to adjust the load of the monitor as shown in Fig 5.
|Model||Code||Inner Packing (Kgs.)||Outer Packing (Kgs.)|
|Computer Monitor Arm - Single Screen||CMA-SA||1 No.||1.92||4 Nos.||8.5|