Short Arm Hinge with four hole mounting plate

Short Arm Hinge with four hole mounting plate

  • Available in Full Overlay.
  • Can be used in Aluminium Framed Cabinets.
  • Max. Opening: 100º.
  • Max. Shutter size: 34" x 22" (850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 16mm to 19mm.
  • Shutter Cavity: Ø 35mm, 12 deep, cavity 4mm from edge.
  • Finish: Nickel Plated

Short Arm Hinge with four hole mounting plate

 

Short Arm Hinge with four hole mounting plate
 

  • Available in Full Overlay.
  • Can be used in Aluminium Framed Cabinets.
  • Max. Opening: 100º.
  • Max. Shutter size: 34" x 22" (850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 16mm to 19mm.
  • Shutter Cavity: Ø 35mm, 12 deep, cavity 4mm from edge.
  • Finish: Nickel Plated
Specifications
Model Code Model Finish 
Short Arm Hinge With 4 Hole Mounting Plate HSA1M1 Full Overlay Nickel Plated
Fitting Instructions
  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter.
  3. Mark holes in the cabinet for mounting plate as per Fig. 2 and screw on the hinge to the cabinet.
  4. By loosening the bracket screws, the shutter can slide  horizontally and also be pivoted for varying pressure.
 
 
 
 
Caution

For efficiency and durability.

  • To avoid damage to hinge, do not force the door to exceed 100º.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinges must not be hammered.

 

Packing Chart
Model Code Size Inner Packing(Kgs.) Outer Packing(Kgs.)
Qty Weight Qty Weight
Short Arm Hinge with 4 hole mounting plate HSA1M1 Ø 35 mm - - 100 11.126
Ebco - Furniture Fittings and Accessories © 2020
GLI