Hinge Slow Motion - 3D

Hinge Slow Motion - 3D

  • Mounting plate has three way adjustment (3D)
  • Unique built in damping system allows the shutter to close in slow motion without banging
  • Available in Full overlay, Half overlay & Inset
  • Max opening: 105º
  • Max. Shutter size: 34" x 22" (850mm x 550mm) for 2 hinges
  • Shutter Thickness: 16mm to 19mm
  • Shutter cavity: Ø35mm, 12 deep, cavity 4mm from edge
  • Finish: Nickel Plated

Hinge Slow Motion - 3D

 

Hinge Slow Motion - 3D
 

  • Mounting plate has three way adjustment (3D)
  • Unique built in damping system allows the shutter to close in slow motion without banging
  • Available in Full overlay, Half overlay & Inset
  • Max opening: 105º
  • Max. Shutter size: 34" x 22" (850mm x 550mm) for 2 hinges
  • Shutter Thickness: 16mm to 19mm
  • Shutter cavity: Ø35mm, 12 deep, cavity 4mm from edge
  • Finish: Nickel Plated
Specifications
                          Model           Code          Type    'A' mm
           Hinge Slow Motion - 3D      HSM-1 3D    Full Overlay      37
     HSM-2 3D    Half Overlay      37
     HSM3- 3D          Inset   37 + T
Fitting Instructions
  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter
  3. Mark holes in the cabinet  for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and click-on the mounting plate. Any play or gap in cabinet can be adjusted in the bracket
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.

Caution

For efficiency and durability

  • To avoid damage to hinge, do not force the door to exceed 105º
  • Do not apply paint or polish
  • Hinges must be parallel
  • The hinge must not be hammered
Ebco - Furniture Fittings and Accessories © 2019
GLI