
Pro-Lift Bed Fitting Regular
- Ideal for storage under bed.
- Special gas spring available in four loads.
- 30° opening angle allows easy access.
- Easy to lift (with the weight of top board) with minimum force.
- Easy access as the gas lift keeps the bed top stay.
- Long brackets provided for better support to the bed platform.
Item | Code No. | Arm Length | Type | Max Force (Kgs.) | Recommended Bed Size (feet) | |
Width | Length | |||||
Pro-Lift Bed Fitting - Regular (w/o Gas Lifts) | PLBF-R | - | - | - | - | - |
Pro-Lift Bed Fitting - Regular Extended Arm (w/o Gas Lifts) | PLBF-E | 1500mm | - | - | - | - |
Pro-Lift Bed Fitting - Regular Extended Arm 1100mm (w/o Gas Lifts) | PLBF-RE-110 | 1500mm | - | - | - | - |
Gas Lift 500N | PLBF 50C | - | Medium | 50 | 2.5 to 3 feet | 5 to 6 feet |
Gas Lift 750N | PLBF 75C | - | Medium | 75 | 3 to 4 feet | 6 to 1.2 feet |
Gas Lift 1200N | PLBF 120C | - | Heavy | 120 | 4 to 5 feet | |
Gas Lift 1500N | PLBF 150C | - | Heavy | 150 | 5 to 6 feet |
- Fit the Fix Brackets on bed frame as per given dimension. (Ref. Fig.1) without the gas spring fitted.
- Now fix the bed platform to the top brackets. (Ref. Fig.2).
- Lastly fit gas spring as shown in diagram (ref. Fig.3).
- Special Note : Installation dimensions are only recommendation and will vary depending on type of construction design.





Item | Item Code | Size | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
Qty | Weight | Qty | Weight | |||
Pro-Lift (for Bed Fittings) | PLBF 50C | 500N | - | - | 50 | 26.3 |
PLBF 75C | 750N | - | - | 50 | 26.3 | |
PLBF 120C | 1200N | - | - | 50 | 26.3 | |
PLBF 150C | 1500N | - | - | 50 | 26.3 | |
Pro-Lift Bed Fittings - Regular (w/o Gas Lifts) | PLBF-R | - | 1 Set | 3.770 | 4 Sets | 16.580 |
Pro-Lift Bed Fittings - Extended Arm (w/o Gas Lifts) | PLBF-E | - | 1 Set | 6.590 | 4 Sets | 28.000 |
- Gas springs used are highly pressured, do not dismantle or damage and do not expose to heat or fire.
- Ensure that the top bed is locked properly with the bed frame.
- Do not tighten nut fully, Gas Spring should be able to rotate.
- Do not apply paint or polish on the product.
- No addtional hinges to be used.
$0.00