Computer Monitor Arm - Single Screen
- Robotic arm design enables flexibility for practical view.
- Concealed cable management system for clutter free work desk.
- Table top grommet mounting for 15" to 27" screen.
- Compatible for VESA 75 x 75 & VESA 100 x 100.
- Die cast for good aesthetics.
- Maximum load: 8 kilograms per arm.
Model | Code | Finish |
Computer Monitor Arm - Single Screen | CMA-SA | White Texture / Anthracite |
- Fix the Diagonal Arm onto the Base with Cap & M6 screw as shown in Fig.1.
- Tighten the grub screw shown in Fig. 1a.
- Drill Ø10.5 mm hole through out on table top on the desired position & Mount the Base as shown in Fig.2.
- Screw the Flat Screen to the Mounting plate as shown in Fig.3.
- Pressure can be adjusted by tightening & loosening the screw as shown in Fig.4.
- Tighten the screws to adjust the load of the monitor as shown in Fig 5.
Model | Code | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
Qty | Weight | Qty | Weight | ||
Computer Monitor Arm - Single Screen | CMA-SA | 1 No. | 1.92 | 4 Nos. | 8.5 |
$0.00