Your Cart

Mini Hinge

Mini Hinge
Mini Hinge
  • Available in Full overlay, Half overlay & Inset.
  • Max. Opening: 100°.
  • Max. Shutter size: 24" x 18" (600mm x 450mm) for 2 hinges.
  • Shutter Thickness: 12mm to 18mm.
  • Shutter cavity: Ø26mm, 10mm deep, cavity 4mm from edge.
  • Finish: Nickel Plated.
ModelCodeSizeFinishPcs / SetSPU
Mini Hinge Overlay, Half Overlay & InsetHM1Ø 26 mmNPSet of 2 Pcs.100
  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Ebco Mini Hinge
Ebco Mini Hinge
Ebco Mini Hinge
ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
Mini Hinge OverlayHM1--100 Sets7.904
Mini Hinge Half OverlayHM2--100 Sets8.12
Mini Hinge InsetHM3--100 Sets8.21

For efficiency and durability.

  • To avoid damage to hinge, do not force door to exceed 100°.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinges must not be hammered.