Pro-lift bed system (Lift System, frame with Slats and Mounting Bracket Kit. Without Gas Lifts)
- Ideal for storage under the bed.
- Bed top size of - 1525 x 2000mm & 1830 x 2000mm.
- Double & triple row of 53 x 8.5mm slats for strength, stability & comfort.
- The kit consists of Pro-Lift Bed Fitting Easy Fit Extended Arm, Frame with wooden slats, Bed frame support & mounting Bracket (in flat pack condition).
- 30° opening angle allows easy access.
- Stopper Lever Provided for Safety.
- Finish: Anthracite.
Item | Code | Max Force (Kgs./Gas Lift) | Dead Load (Kgs.) | Bed Internal Size | finish | |
Width | Length | |||||
Pro-Lift Bed System (Lift System, Frame with Slats, Mounting bracket kit & Bed Frame Support) | PLBSS1520 | - | - | 1557 | 2024 | Anthracite |
PLBSS1820 | - | - | 1862 | 2024 | ||
Gas Lift 1200N (For PLBS 1520) | PLBF 120C | 120 | 55 - 60 | - | - | |
Gas Lift 1500N (For PLBS 1820) | PLBF 150C | 150 | 65 - 70 | - | - | |
Mattress Stopper | WB-MST-SS | - | Stainless Steel | |||
Pro-Lift Bed Fitting - Handle | PLBF-H128-AT | - | Antracite |
- Insert Plastic Corner in Square Pipe & Ensure that holes for Bed Fitting are on the inner side of Frame as shown in Fig.1a.
Screw M8 x 40 to the Bracket & Support Pipe as shown in Fig.1b & 1c with help of Allen key & wrench. - Kindly identify Left L & Right R pipe as depicted above
- Fit the Slat in Single & Double Plastic Cap and fix on the frame with the help of Plastic Hammer as shown in Fig.2.
- Fit the Fix Bracket on bed frame as per dimensions. (Ref. Fig.3) without the gas spring fitted.
- Fit Frame onto Bed Fitting with help of Screw & Nut as shown in Fig.4.
- Lastly fit the gas spring & Stopper Lever as shown in diagram (Ref. Fig.5).
- Bed Frame Support can be fitted as per user convenience (Ref. Fig.4).
- Special Note: Installation dimensions are only recommendationand will vary depending on type of construction design.
- Gas springs used are highly pressured, do not dismantle or damage and do not expose to heat or fire.
- Ensure that the top bed is locked properly with the bed frame.
- Do not tighten nut fully, Gas Spring should be able to rotate.
$0.00