Menu
Your Cart

Hi Slide 45

Hi Slide 45
Hi Slide 45
  • For Flush Mounted Sliding Shutter.
  • Common Top and Bottom Track.
  • Bottom Running Shutters up to 45Kgs.
  • System 32 Compatible.
ItemCode No.Finish
Hi-Slide 45HS-45Zinc Plated White
Aluminium Track (for top / bottom) - 2.44mHS-45-AS-2Anodized Silver
Aluminium Track (for top / bottom) - 3.66mHS-45-AS-3
Soft Close Kit for HS-45 / 45DTHS-SCK2-40GR
  1. Insert the track into the slot at top and bottom of cabinet. Slot should be 8.5mm wide and 12.5mm deep refer Fig. 2 for dimensions refer Fig. 1.
  2. Fit the catch with screws into the bottom track as shown in Fig.3 for dimensions refer Fig.1
  3. Drill Ø35mm cavity, 11mm deep on the bottom of the shutter as shown in Fig.4 and screw the bottom guide (shutter thickness should be ranging from 16mm to 23mm).
  4. Fit the stopper onto the bottom side of both the inner and outer shutter as shown in Fig.5 for dimension refer Fig.1.
  5. Fit the top guide onto the top side of the shutter as shown in Fig.1. (Don’t tighten the screw fully screw should be free enough to slide the top guide down).
  6. Engage the bottom guide into the bottom track by tilting as shown in Fig.6. (Note:- always engage the outer shutter first).
  7. Slide the top guide up into the top track and tighten the screw as shown in Fig.7.
Ebco Hi Slide 45
Ebco Hi Slide 45
Ebco Hi Slide 45
Ebco Hi Slide 45
Ebco Hi Slide 45
Ebco Hi Slide 45
Ebco Hi Slide 45
Ebco Hi Slide 45
ItemItem CodeInner Packing (Kgs.)Outer Packing (Kgs.)
QtyWeightQtyWeight
Hi Slide 45HS-451 Set0.2150 Sets35.4
Al. Profile Track HS-45 / HS-45 DT (for Top & Bottom)HS-45-AS-2--97.60 Mtrs11
HS-45-AS-3--146.40 Mtrs16.2
$0.00