Your Cart

EURO - Slip on Hinge SS304

EURO - Slip on Hinge SS304
EURO - Slip on Hinge SS304
  • Unique built in damping system allows the shutter to close in slow motion without banging
  • Available in Full overlay & half overlay
  • Max. opening: 105º
  • Max. shutter size: 34" x 22" (850mm x 550mm) for 2 hinges
  • Shutter thickness: 16mm to 19mm
  • Shutter cavity: ø35mm, 12mm deep, cavity 4mm from edge
  • Finish: Electropolished
Euro - Slip on Hinge SS 304E-HS1-SS-M1Overlay36.0Ø 35 mmSS 304
E-HS2-SS-M1Half Overlay58.0Ø 35 mmSS 304
  1. Drill out the cavity as per the dimension in Fig. 1, using the "Ebco" drilling jig. Do not chisel.
  2. Fit the cap into shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered
  3. Mark holes in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.


Ebco Euro Slip on Hinge SS304
Ebco Euro Slip on Hinge SS304
Ebco Euro Slip on Hinge SS304


ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
Euro - Slip on Hinge Overlay SS304E-HS1-SS--100 Sets13.114
Euro - Slip on Hinge Half Overlay SS304E-HS2-SS--100 Sets 13.586
Euro - Slip on Hinge Inset SS304E-HS3-SS--100 Sets13.798


For efficiency and durability.

  • To avoid damage to hinge, do not force the door to exceed 105°.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinges must not be hammered.