Menu
Your Cart

Hinge Slow Motion - 3D

Hinge Slow Motion - 3D
Hinge Slow Motion - 3D
Hinge Slow Motion - 3D
Hinge Slow Motion - 3D
Hinge Slow Motion - 3D
Hinge Slow Motion - 3D
Hinge Slow Motion - 3D
  • Mounting plate has three way adjustment (3D)
  • Unique built in damping system allows the shutter to close in slow motion without banging
  • Available in Full overlay, Half overlay & Inset
  • Max opening: 105º
  • Max. Shutter size: 34" x 22" (850mm x 550mm) for 2 hinges
  • Shutter Thickness: 16mm to 19mm
  • Shutter cavity: Ø35mm, 12 deep, cavity 4mm from edge
  • Finish: Nickel Plated
                          Model          Code         Type 'A' mm      Finish
           Hinge Slow Motion - 3D     HSM1- 3D   Full Overlay     37Nickel Plated
     HSM2-3D   Half Overlay     37
     HSM3-3D         Inset  37 + T
  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter
  3. Mark holes in the cabinet  for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and click-on the mounting plate. Any play or gap in cabinet can be adjusted in the bracket
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.

For efficiency and durability

  • To avoid damage to hinge, do not force the door to exceed 105º
  • Do not apply paint or polish
  • Hinges must be parallel
  • The hinge must not be hammered
$0.00