Aluminium Corner Cleat

SMALL

• Cut the aluminium sections in 45° along the edges. From the edge drill a hole and slot as per the dimensions and insert the Aluminium Corner Cleat
  as shown in fig.1
• Ensure that the Aluminium Corner Cleat locks into the hole.
• Tighten the assembly using 4mm Allen Key as shown in fig.2.

BIG

1. Cut the aluminium sections in 45° along the edges. From the edge drill a hole and slot as per the dimensions and insert the Aluminium Corner Cleat as shown in fig.1
2. Ensure that the Aluminium Corner Cleat locks into the hole.
3. Tighten the assembly using 5mm Allen Key as shown in fig.1