Your Cart

Sliding Door Fittings - Standard

Sliding Door Fittings - Standard
Sliding Door Fittings - Standard
  • Precision roller system has good load bearing and life.
  • Has special guides and catches to secure the door.
  • Load capability - 125kgs.
  • Easy to install.


  ItemCode No.Length (Mtrs) Max. Load          (Kgs)Finish
  Sliding Fittings StandardSDF-125SM-125Zinc White
Aluminium Section (125 Kgs)  SDF-AS-125M-2Length - 2.44 mtrs-   Anodised Silver
SDF-AS-125M-3Length - 3.66 mtrs-Anodised Silver
Track for Sliding Door Fitting with Fixed GlassSDF-125-ATG-2Length - 2.44 mtrs-Anodised Silver
SDF-125-ATG-3Length - 3.66 mtrs Anodised Silver
     Wall Mounting Bracket   SDF-WB  --  -      Zinc White 


  1. Standard model is provided with Hangers (2 nos.) Which are fitted at the top of the door (Ref. Fig. 1).
  2. The bottom guides (2 Nos.) are fitted on the floor. The groove required in the door is 9mm wide and 12mm deep (Ref. Fig 2.).
  3. The catch is fitted in the aluminium section at both ends and can be adjusted for pressure. (Ref. Fig 3).
  4. The door is hung on the sliding fitting and flange nut is tightened. Height adjustment of 14mm is available (Ref. Fig. 2).
  5. Optional wall mounting brackets are available. This is to be fitted every 600mm on aluminium section (Ref. Fig. 4).


ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
Standard - 125 Kgs.SDF-125SM1 Set0.4250 Sets21.8
Aluminium Section (125 Kgs)SDF-AS-125M-2--24.40 Mtrs14.3
SDF-AS-125M-3--36.60 Mtrs20.7
Wall Mounting BracketSDF-WB40 Nos2.31400 Nos23.9