
Thick Door Hinge
- Available in Full Overlay, Half Overlay & Inset.
- Max. Opening: 100°.
- Max. Shutter size: 34" x 22"(850mm x 550mm) for 2 hinges.
- Shutter Thickness: 18mm to 30mm.
- Shutter cavity: Ø40mm, 14 deep, 4mm from edge.
- Finish: Nickel Plated
Model | Code | Type | 'A' mm | Size | Finish |
Thick Door Hinge Overlay, half Overlay & Inset | HTD1 | Full Overlay | 40.0 | Ø 40 mm | Nickle Plated |
HTD2 | Half Overlay | 40.0 | Ø 40 mm | ||
HTD3 | Inset | 35.0 | Ø 40 mm |
- Drill out the cavity in the shutter as per the dimensions in Fig. 1.
- Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter.
- Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
- Now, align the shutter with the cabinet and click-on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
- By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.



Model | Code | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
Qty | Weight | Qty | Weight | ||
Thick Door Hinge Overlay | HTD1 | - | - | 100 Sets | 17.404 |
Thick Door Hinge Half Overlay | HTD2 | - | - | 100 Sets | 17.418 |
Thick Door Hinge Inset | HTD3 | - | - | 100 Sets | 17.902 |
For efficiency and durability.
- To avoid damage to hinge, do not force the door to exceed 100°.
- Do not apply paint or polish.
- Hinges must be parallel.
- The hinges must not be hammered.
$0.00