
Sleek Telescopic Drawer Slide - 45 kg (SS 304)
- Manufactured out of Stainless Steel 304 grade.
- Precision ball bearing with full extension of drawer
- Direct fitting from front
- Removable drawer with Latch
- System 32 installation
- Load capacity 45 kgs.
Model | Code | Length (mm) | Extension (mm) | Gap/Side (mm) | Max. Load (kg.) | Finish |
STDS - 45 Kg. (SS304) | STDS40-45SS | 400 | 405 | 12.7 to 13.0 | 45 | SS 304 |
STDS45-45SS | 450 | 458 | ||||
STDS50-45SS | 500 | 520 | ||||
STDS55-45SS | 550 | 570 |
- To install sleek telescopic slide(SS 304) 12.7 to 13.0mm side gap per side is required between cabinet and drawer. (Refer Fig. 1).
- Depress latch and remove the inner slide. (Refer Fig. 2).
- Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
- Slides should be fitted parallel and screws tightened fully to avoid gaps.
- Fit inner slide onto the outside of the drawer.
- Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
Model | Code | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
Qty | Weight | Qty | Weight | ||
Sleek Telescopic Drawer Slides - 45Kg. (SS304) | STDS40-45SS | 10 Sets | 12.2 | 30 Sets | 37.15 |
STDS45-45SS | 10 Sets | 13.6 | 30 Sets | 41.392 | |
STDS50-45SS | 10 Sets | 15.6 | 20 Sets | 32.066 | |
STDS55-45SS | 10 Sets | 17 | 20 Sets | 34.892 |
For efficiency and durability,
- Strictly maintain 12.7 to 13.0mm side gap.
- Fit slides parallel and at equal heights.
- Do not apply paint or polish.
- Do not let saw dust enter into the slides.
$0.00