Thick Door Hinge - Soft Close
- Available in Full Overlay, Half Overlay & Inset
- Soft Close mechanism prevents shutters from banging.
- Max. Opening : 95°
- Max. Shutter Size: 34" x 22" (850mm x 550mm) for 2 hinges.
- Shutter Thickness: 18mm to 40mm.
- Shutter Cavity: Ø40mm, 14 deep
Code Nos. | Model | 'A' mm | Finish |
HTD1-SC | FULL OVERLAY | 37.0 | Nickle Plated |
HTD2-SC | HALF OVERLAY | 37.0 | |
HTD3-SC | INSET DOOR | 37 + S |
S = Thickness of Shutter
- Drill out the cavity in the shutter as per the dimensions in Fig. 1.
- Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter.
- Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
- Now, align the shutter with the cabinet and click-on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
- By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Model | Code | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
Qty | Weight | Qty | Weight | ||
Thick Door Hinge - Overlay - Soft Close | HTD1-SC | - | - | 50 Sets | 11.98 |
For efficiency and durability.
- To avoid damage to hinge, do not force the door to exceed 95°.
- Do not apply paint or polish.
- Hinges must be parallel.
- The hinges must not be hammered.
$0.00