Your Cart

Sleek Telescopic Drawer Slide - 45 kg (SS 304)

Sleek Telescopic Drawer Slide - 45 kg (SS 304)
Sleek Telescopic Drawer Slide - 45 kg (SS 304)
  • Manufactured out of Stainless Steel 304 grade.
  • Precision ball bearing with full extension of drawer
  • Direct fitting from front
  • Removable drawer with Latch
  • System 32 installation
  • Load capacity 45 kgs.
ModelCodeLength (mm)Extension (mm)Gap/Side (mm)Max. Load (kg.)Finish
STDS - 45 Kg. (SS304)STDS40-45SS40040512.7
to 13.0
45SS 304
  1. To install sleek telescopic slide(SS 304) 12.7 to 13.0mm side gap per side is required between cabinet and drawer. (Refer Fig. 1).
  2. Depress latch and remove the inner slide. (Refer Fig. 2).
  3. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
  4. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  5. Fit inner slide onto the outside of the drawer.
  6. Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.


ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
QtyWeight QtyWeight 
Sleek Telescopic Drawer Slides - 45Kg. (SS304)STDS40-45SS10 Sets12.230 Sets37.15
STDS45-45SS10 Sets13.630 Sets41.392
STDS50-45SS10 Sets15.620 Sets 32.066
STDS55-45SS10 Sets1720 Sets34.892

For efficiency and durability,

  • Strictly maintain 12.7 to 13.0mm side gap.
  • Fit slides parallel and at equal heights.
  • Do not apply paint or polish.
  • Do not let saw dust enter into the slides.