Menu
Your Cart

Euro Slow Motion Hinge ( 2 / 4 Hole Mounting Plate )

Euro Slow Motion Hinge ( 2 / 4 Hole Mounting Plate )
Euro Slow Motion Hinge ( 2 / 4 Hole Mounting Plate )
  • Unique built in damping system allows the shutter to close in slow motion without banging.
  • Available in Full overlay, Half overlay & Inset.
  • Max opening 105°
  • Max shutter size: 34" x 22" (850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 16mm to 19mm.
  • Shutter cavity: Ø35mm, 12mm deep, cavity 4mm from edge.
  • Finish: Nickel Plated 
ModelCodeA'mmFinish 
Euro Slow Motion Hinge - Full Overlay with 2 Hole Mounting PlateE-HSM136Nickel Plated 
Euro Slow Motion Hinge - Half Overlay with 2 Hole Mounting PlateE-HSM236Nickel Plated 
Euro Slow Motion Hinge - Inset with 2 Hole Mounting PlateE-HSM358Nickel Plated 

 

ModelCodeA'mmFinish 
Euro Slow Motion Hinge - Full Overlay with 4 Hole Mounting PlateE-HSM1-M136Nickel Plated 
Euro Slow Motion Hinge - Half Overlay with 4 Hole Mounting PlateE-HSM2-M136Nickel Plated 
Euro Slow Motion Hinge - Inset with 4 Hole Mounting PlateE-HSM3-M158Nickel Plated
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
  1. Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'Ebco' Drilling jig. Do not chisel.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
  4. Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.

 

Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
Ebco Euro Slow Motion Hinge Regular With 4 hole Mounting Plate
ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
QtyWeightQtyWeight
Euro Slow Motion Hinge Overlay with 2 hole Mounting PlateE-HSM1--509.358
Euro Slow Motion Hinge Half Overlay with 2 hole Mounting PlateE-HSM2--509.472
Euro Slow Motion Hinge Inset with 2 hole Mounting PlateE-HSM3--509.904
Euro - Slow Motion Hinge Overlay with 4 hole Mounting PlateE-HSM1-M1--509.75
Euro - Slow Motion Hinge Half Overlay with 4 hole Mounting PlateE-HSM2-M1--509.75
Euro - Slow Motion Hinge Inset with 4 hole Mounting PlateE-HSM3-M1--509.75

 

 

 

For efficiency and durability 

  • To avoid damage to hinge, do not force the door to exceed 105°.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinge must not be hammered.
$0.00