Your Cart

Hinge Slow-motion

Hinge Slow-motion
Hinge Slow-motion
  • Unique built in damping system allows shutter to close in slow motion without banging.
  • Special cover plate provided.
  • Available in Full overlay, Half overlay & Inset.
  • Max. opening 105°
  • Max. Shutter size : 34'' x 22'' (850 mm x 550 mm) for 2 hinges
  • Shutter Thickness: 16mm to 19mm.
  • Shutter cavity: Ø35 mm, 12 deep, cavity 4 mm from edge.
  • Finish: Nickel Plated.
ModelCodeTypeSize'A' mmFinish
Hinge Slow-Motion OverlayHSM1Full Overlayø 35 mm36Nickel Plated
Hinge Slow-Motion Half OverlayHSM2Half Overlayø 35 mm40
Hinge Slow-Motion InsetHSM3Insetø 35 mm58
  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1. Use 'Ebco' Drilling jig. Do not chisel.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Make hole in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and click-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Ebco Hinge Slo-motion
Ebco Hinge Slo-motion
Ebco Hinge Slo-motion
Ebco Hinge Slo-motion
ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
Hinge Slo-Motion (Overlay)HSM1--50 Sets11.512
Hinge Slo-Motion (Half Overlay)HSM2--50 Sets11.642
Hinge Slo-Motion (Inset)HSM3--50 Sets12.016

For efficiency and durability.

  • To avoid damage to hinge, do not force door to exceed 105°.
  • Do not apply paint or polish.
  • Hinges must be parallel.
  • The hinges must not be hammered.