Menu
Your Cart

Glass Door Hinge - Ø26mm

Glass Door Hinge - Ø26mm
Glass Door Hinge - Ø26mm
  • Available in Full overlay, Half overlay & Inset.
  • Max. opening: 100°.
  • Max. Shutter size: 600mm x 350mm for 2 hinges.
  • Shutter Thickness: 4 mm to 6 mm.
  • Shutter cavity: Ø26mm throughout, cavity 4mm from edge.
  • Finish: Nickel Plated.
Model  CodeType'A' mmFinish
Glass Door Hinge OverlayHGD1-26FULL OVERLAY38Nickel Plated
Glass Door Hinge - Half OverlayHGD2-26HALF OVERLAY38
Glass Door Hinge - InsetHGD3-26INSET42
  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1. Do not chisel.
  2. Mark hole in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
  3. Fit the cap into the shutter cavity as shown in Fig. 3. and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  4. Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Ebco Glass Door Hinge - Ø26mm
Ebco Glass Door Hinge - Ø26mm
Ebco Glass Door Hinge - Ø26mm
Ebco Glass Door Hinge - Ø26mm
ModelCodeInner Packing(Kgs.)Outer Packing(Kgs.)
QtyWeightQtyWeight
Glass Door Hinge - OverlayHGD1-26--100 Sets9.304
Glass Door Hinge - Half OverlayHGD2-26--100 Sets9.022
Glass Door Hinge - InsetHGD3-26--100 Sets9.415
$0.00