Sleek Telescopic Drawer Slides SS304 - Soft Close
- To install sleek telescopic slide(SS 430) 12.7 to 13.0mm side gap per side is required between cabinet and drawer. (Refer Fig. 1).
- Depress latch and remove the inner slide. (Refer Fig. 2).
- Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
- Slides should be fitted parallel and screws tightened fully to avoid gaps.
- Fit inner slide onto the outside of the drawer.
- Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
$0.00