Your Cart

Sleek Telescopic Drawer Slides - 35

Sleek Telescopic Drawer Slides - 35
Sleek Telescopic Drawer Slides - 35
  • Precision telescopic slides with full extension of drawer
  • Direct fitting from front
  • Removable drawer with Latch
  • System 32 Installation
  • Load Capacity: 35 Kgs.
             Model      CodeLength (mm)  Extension 
Max. Load kgs       Finish
Sleek Telescopic Drawer
Slides - 35
STDS-35-35     350      35012.7 to 13.0      35 Kgs Zinc Plated White
STDS-40-35     400      400
STDS-45-35     450      450
STDS-50-35     500      500
  1. To install sleek telescopic drawer slide 12.7 to 13.0mm gap per side is required between cabinet and drawer. (Ref. Fig. 1)
  2. Depress latch and remove the inner slide. (Ref. Fig. 2)
  3. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
  4. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  5. Fit inner slide on to the outside of the drawer.
  6. Now slide the drawer with inner slide fitted on to the intermdediate slides on the cabinet till the latch engage automatically.



                       Model     Code  Inner Packing (Kgs.) Outer Packing (Kgs.)
   Qty    Weight    Qty    Weight
 Sleek Telescopic Drawer Slides - 35STDS-35-3510 Sets      8.85 40 Sets     36.1
STDS-40-3510 Sets     10.2 30 Sets       31
STDS-45-3510 Sets     11.5 30 Sets    34.7
STDS-50-3510 Sets    12.85 20 Sets   26.45


For efficiency and durability:

  1. Strictly maintain 12.7 to 13.0mm side gap.
  2. Fit slides parallel and at equal heights.
  3. Do not apply paint or polish.
  4. Do not let saw dust enter into the slides.