Menu
Your Cart

Sleek Telescopic drawer Slide (I)-35- Soft Close

Sleek Telescopic drawer Slide (I)-35- Soft Close
Sleek Telescopic drawer Slide (I)-35- Soft Close
  • Precision telescopic slides.
  • Built in soft closing function
  • Easy for installation.
  • Direct fitting from front.
  • Removable drawer with Latch
  • System 32 installation.
  • Load capacity: 35kgs.
ModelCodeLength
mm
Extension
mm
Gap / Side
mm
Max. Load
Kgs.
Finish
Sleek Telescopic Drawer Slides - (I) 35 - Soft CloseSTDS30-I-35-SC30028512.7
to
13.0
35Zinc White
STDS35-I-35-SC35034812.7
to
13.0
35Zinc White / Black
STDS40-I-35-SC40039812.7
to
13.0
35Zinc White / Black
STDS45-I-35-SC45044712.7
to
13.0
35Zinc White / Black
STDS50-I-35-SC50050012.7
to
13.0
35Zinc White / Black
STDS55-I-35-SC55055012.7
to
13.0
35Zinc White
STDS60-I-35-SC60060012.7
to
13.0
35Zinc White
  1. To install sleek telescopic drawer slide soft close 12.7 to13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)
  2. Depress latch and remove the inner slide. (Refer Fig. 2)
  3. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
  4. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  5. Fit inner slide onto the outside of the drawer.
  6. Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.

 

Ebco Sleek Telescopic drawer Slide I 35 Soft Close
Ebco Sleek Telescopic drawer Slide I 35 Soft Close
ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
QtyWeight QtyWeight 
Sleek Telescopic Drawer Slides - (I) 35 - Soft CloseSTDS30-I-35-SC10 Sets8.2240 Sets33.502
STDS35-I-35-SC10 Sets9.67840 Sets39.498
STDS40-I-35-SC10 Sets11.27230 Sets34.366
STDS45-I-35-SC10 Sets12.8130 Sets39.022
STDS50-I-35-SC10 Sets14.01820 Sets28.922
STDS55-I-35-SC10 Sets15.69420 Sets32.28
STDS60-I-35-SC10 Sets17.2720 Sets35.478

For efficiency and durability.

  • Strictly maintain 12.7 to 13.0mm side gap.
  • Fit slides parallel and at equal heights.
  • Do not apply paint or polish.
  • Do not let saw dust enter into the slides.
$0.00