Premium Sleek Telescopic Slide - Push Open

1. To install ball bearing slide, 13.0 to 13.8 mm side gap per side is required between cabinet and drawer. (Refer Fig. 1)
2. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide
3. Slides should be fitted parallel and screws tightened fully to avoid gaps.
4. Fit inner slide onto the outside of the drawer.
5. Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch automatically engages.

Drilling Diagram for Cabinet

For efficiency and durability:

• Strictly maintain 13.0 to 13.8 mm side gap.
• Fit slides parallel and at equal heights.
• Do not apply paint or polish.
• Do not let saw dust enter into the slides.