Full Panel with 6mm Bottom Track Drawer Slide

1. Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
2. Clearance of 25.4 mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
3. Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
4. Eccentric cam for front facia height adjustment provided in 86 mm and 125 mm height full panels with 6mm bottom track (Refer Fig.3).
5. Screws should be recessed to avoid fouling.
6. Fixed slides should be fitted parallel and at equal height to each other.
7. Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.

Drilling Diagram for Cabinet (6mm Bottom Track)

For efficiency and durability.

• Strictly maintain side gap of 15.5 mm per side.
• Fix slides parallel and at equal height.
• Do not apply paint or polish.