
Click On Hinge (I)
- Unique Click on System enables easy installation of shutter
- Available in Full overlay, Half overlay & Inset.
- Max. Opening: 105°.
- System - 32 compatible
- Max. Shutter size: 34" x 22"(850mm x 550mm) for 2 hinges.
- Shutter Thickness: 16mm to 19mm.
- Shutter cavity: Ø35mm, 12 deep, cavity 4mm from edge.
- Finish: Nickel Plated
Code Nos. | Model | 'A' mm | Finish |
HC1-I | Full Overlay | 36.0 | Nickel Plated |
HC2-I | Half Overlay | 36.0 | |
HC3-I | Inset | 56.0 |
- Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
- Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
- Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
- Now, align the shutter with the cabinet and click-on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
- By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.




Model | Code | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
Qty | Weight | Qty | Weight | ||
Click on Hinge - Overlay (I) | HC1-I | - | - | 100 Sets | 15.764 |
Click on Hinge - Half Overlay (I) | HC2-I | - | - | 100 Sets | 16 |
Click on Hinge - Inset (I) | HC3-I | - | - | 100 Sets | 16.192 |
For efficiency and durability.
- To avoid damage to hinge, do not force the door to exceed 105°.
- Do not apply paint or polish.
- Hinges must be parallel.
- The hinges must not be hammered.
$0.00