Menu
Your Cart

Flat Screen Holder Single Arm - Edge Mount

Flat Screen Holder Single Arm - Edge Mount
Flat Screen Holder Single Arm - Edge Mount
Flat Screen Holder Single Arm - Edge Mount
Flat Screen Holder Single Arm - Edge Mount
Flat Screen Holder Single Arm - Edge Mount
Flat Screen Holder Single Arm - Edge Mount
Flat Screen Holder Single Arm - Edge Mount
  • Table top edge mounting with single arm.
  • No drilling of holes required.
  • Height adjustment of 100mm.
  • Compatible for VESA 75 x 75 & VESA 100 x 100 with an extra plate. 
  • Die cast for good aesthetics.
  • Can be rotated towards left & right as well as tilted up & down with a single knob.
  • Load capacity: < 7 kilograms.
ModelCodeFinish
Flat Screen Holder Single Arm - Edge MountFSHSA - EMBlack / Anthracite
  1. Clamp the vertical pole onto the edge of the table as shown in Fig.1.
  2. Clip the height adjustment clip onto one of the holes on the vertical pole, & slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip, as shown in Fig.2.
  3. Assemble the other parts as shown in Fig.3.
  4. For VESA 100mm model screw the 100mm plate to hanging bracket with M4 screws as shown in Fig.4.
  5. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig.5.
  6. Insert  the monitor cables into the arm clip & wire holder, then clip them to the diagonal arm & vertical pole respectively as shown in Fig.6.

 

Ebco Flat Screen Holder Single Arm - Edge Mount
Ebco Flat Screen Holder Single Arm - Edge Mount
Ebco Flat Screen Holder Single Arm - Edge Mount
Ebco Flat Screen Holder Single Arm - Edge Mount
Ebco Flat Screen Holder Single Arm - Edge Mount
Ebco Flat Screen Holder Single Arm - Edge Mount
Ebco Flat Screen Holder Single Arm - Edge Mount
ModelCodeInner Packing (Kgs.)Outer Packing (Kgs.)
QtyWeightQtyWeight
Flat Screen Holder Single Arm - Edge MountFSHSA-EM1 No.1.56 Nos.10.2
$0.00