Short Arm Hinge with four hole mounting plate

1. Drill out the cavity in the shutter as per the dimensions in Fig. 1
2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter.
3. Mark holes in the cabinet for mounting plate as per Fig. 2 and screw on the hinge to the cabinet.
4. By loosening the bracket screws, the shutter can slide  horizontally and also be pivoted for varying pressure.

 

For efficiency and durability.

• To avoid damage to hinge, do not force the door to exceed 100^º.
• Do not apply paint or polish.
• Hinges must be parallel.
• The hinges must not be hammered.